I have done the layout for the workbench top. Dog holes (3/4") are to be located at the intersection of the red lines, and the relief for the threaded rod (5/8") is the green line.
Very informative article, which you have shared here. After reading your article I got very much information and it is very useful for me. You can also visit stainless steel threaded rod for more Siddhagiri Metals & Tubes related information and knowledge, I am thankful to you for sharing this article here.
Very informative article, which you have shared here. After reading your article I got very much information and it is very useful for me. You can also visit stainless steel threaded rod for more Siddhagiri Metals & Tubes related information and knowledge, I am thankful to you for sharing this article here.
ReplyDelete
ReplyDeleteIt was such a good post. Visit stainless steel flanges manufacturers in india. Thanks for sharing.